PetSafe Microchip Cat Door Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spacer for a Petsafe microchip cat door (model PPA19-16145) to allow a more polished looking installation in…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 428
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
This is a spacer for a Petsafe microchip cat door (model PPA19-16145) to allow a more polished looking installation in materials that are thinner than a standard door. Not very much structure is required, but a full width version is also included. Thickness is 2" (50.8 mm) but it should be easy to alter in your slicer or with a modeler (STEP format files are included). Smaller printers may also require it be cut into multiple pieces to fit.
Example of possible use is included: private cat feeding enclosure made from a large storage bin to keep other cats from stealing food.
Print Settings
Printer:
Sidewinder X1
Rafts:
No
Supports:
No
Notes:
I had good luck printing the thinner model with two perimeters and an infill of five percent.
Category: Pets