1 / 6
orbiter 2.0 drag chain anchor for ender 3 afterburner stealth burner — zdjęcie 1
1 / 6

orbiter 2.0 drag chain anchor for ender 3 afterburner stealth burner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

.afterburner or stealth burner with a orbiter 2.0 for a ender 3 should work on v2 ,,pro cr10s with rail

Ocena
5 / 5
Polubienia
23
Pobrania
92
Wydruki
1
Wyświetlenia
982
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

For Drag Chains 10x11mm.afterburner or stealth burner with a orbiter 2.0 for a ender 3 should work on  v2 ,,pro  cr10s ect with rail .. left exit or right. as pictured . the orbiter can get hot so petg or abs is recommend .m3 bolt can tread in or you can run a m3 all the way with a nut .

the motor cover part was a remix  i can't say with 100% but i believe its from kevinakasam.the ender 3 belted z guy found it in a  form post that lead me down a path a while ago .

Tagi