GreenScreenSupport/Stand V1

01/25/2023 update – Initially I made the 25.4 mm legs and had that measurement for everything but then noticed it made contact with the tubes so i extended it to 40 mm. you can still use the 25.4 mm legs, just need the retaining piece so it won't move if picked up. I have not printed the 40 mm leg so I i'll update on that too.

Hello! I made this stand to hold up a greenscreen I recently bought.

IF YOU HAVE ANY QUESTIONS, LET ME KNOW, I'LL BE HAPPY TO ANSWER THEM!

These are the print settings I used, These are settings that work for me but they MIGHT not work for others as we all have different printers and settings. I printed these pieces using a 

creality ender 3 pro

Printed using matterhackers pla: bright green, red, and forest green

Temps: 

Bed - 70 c

Hotend - 200 c

Speed - 90 mm/sec is what worked for me for the majority of these files/prints

Infill - 5% using lines infill pattern

No supports for any of these prints :)

Materials/files needed for this :

Green screen (fabric can be found at a local art supply store or a Walmart)

I used a 44-inch by 60-inch piece of green fabric from joanns (an art store)

• The length is up to you!
• Has to be less than the length of the dowels or it will look like a curtain and not be flat (hope you understand what I mean)

Three Dowels

• Length of dowel of your choice (I went with 6ft dowels)
• 5/8 inch diameter ( can be different, but this is what I made the file hole size; will include the original cad file so you can modify it to your preference diameter)

Right Angle Pieces

• This is required for connecting the dowels to one another at the top section
• Will provide a link to that model here: https://www.printables.com/model/309509-90-degree-elbow
• Will need two of these pieces