Golf Cart/ Buggy Business Cardholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To store business cards/ Loyalty Cards. Some assembly is required.
- Ocena
- 5 / 5
- Polubienia
- 85
- Pobrania
- 406
- Wydruki
- 4
- Wyświetlenia
- 1853
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Made for my brother for his works loyalty cards/ business cards.
Prints without supports but there are a couple of long bridges, so if you struggle with them in general, consider adding your preferred supports.
I printed at 0.4mm nozzle 0.2mm layers for all parts. Some assembly is required.
Wheels attach slightly above their centre due to the cardholder cutting into the rear wheel arch. Recommend that you secure the rear ones first to see the offset before attempting the fronts.
3mf and stl versions of all files available.
my pictures are of the original version. I've made the roof slightly thicker on the front where it printed thin and the front roof support was made thicker to improve printing.