Space Base Lipped Player Board Overlay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An overlay for Space Base player boards to hold indicator cubes in place with lips to hold the overlay on the board.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 300
- Wydruki
- 2
- Wyświetlenia
- 1179
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
There were a few Space Base player board overlays available but I didn't really see a good solution to keeping them in place. Figured I could use it as an opportunity to learn some 3D modeling. Separated the original file into three models and added lips to keep the overlays in place on top of the board.
Printed on an AnkerMake M5 easy mode with 100% infill and 0.2mm layer levels. Did encounter some warping, but still very usable. Tolerances on the keys are tight but inserting male end from the top seems to work. No supports needed if printed as oriented.