1 / 6
Vise Jaws Protection (Schraubstockbacken-Schutz)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plastic is much more vulnerable against jam and imprints of vise jaws. So protect your 3D-printed parts.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 405
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
For assembly purposes or some touch-ups on your 3D-print it is good to use a vise for fixing the parts. If you have protected or better said soft jaws by using a plastic cover this is even better.
Best is if they do not fall off the jaws, therefore, they have imprinted and enclosed Neodyms.
Printed on my MK3S+ with PETG, 50% infill.
Designed in TinkerCad.