AGM-69A Missile (SRAM)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a full size rendering of an AGM-69A Missile.
- Ocena
- 4 / 5
- Polubienia
- 32
- Pobrania
- 510
- Wydruki
- 2
- Wyświetlenia
- 1767
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a full size rendering of an AGM-69A Missile. Cura resizes it for me to 5% so keep that in mind when loading into your slicer.
My wife and I worked on this Missile System during our 20 years in the Air Force. The 3D Model is based on drawings and technical specifications provided by Ron Caudillo.
I have included the Missile alone and a Missile with a slot for the stand as well as the stand itself.
I print the missile standing on its tail cone and fins. I suggest using a raft or a brim since the tail fins are rather thin on the surface.
Print instructions
Category: 3D Printing Summary
This is a full size rendering of an AGM-69A Missile. Cura resizes it for me to 5% so keep that in mind when loading into your slicer.
My wife and I worked on this Missile System during our 20 years in the Air Force. The 3D Model is based on drawings and technical specifications provided by Ron Caudillo.
I have included the Missile alone and a Missile with a slot for the stand as well as the stand itself.
I print the missile standing on its tail cone and fins. I suggest using a raft or a brim since the tail fins are rather thin on the surface.