Cute Frog Sculpture "Cutefroggo"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first ever Nomadsculpt. I like it so much! :)
- Ocena
- 5 / 5
- Polubienia
- 114
- Pobrania
- 646
- Wydruki
- 7
- Wyświetlenia
- 2152
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
Be sure you have good build plate adhesion as he might jump away….
No seriously, the front legs have a slightly too steep angle, which can be hard to print if you do not have proper cooling and build plate adhesion. Other than that it's super easy to print!
Prints 100% support free.
It can be coloured in Prusaslicer (see picture) but I do not have a MMU setup. Would love pictures of a printed & colored version!
There is a fixed and MMU version right made by ltlowe :)
Sorry for the file size and some not so sharp edges which are visible in the slicer. But it prints smooth and just fine.