1 / 5
Tonuino Box with cardholder and bumpers.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created this Tonuino Box. It can be easily disassembled.
- Ocena
- 4,5 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 2
- Wyświetlenia
- 411
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (24)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (7)Powiązane
Hello, I designed this Tonuino Box.
I added the stepfiles so its easy to modify.
The handels are designed to hold a textilhandel. So its easier to carry around.
Other needed parts:
- Speaker: Visaton FR 10 HM
- Button 1x5 from Leiterpiraten
- Tonuino Classic V 1.7
- Realpower Powerpank with 10.000 mah
- A Switch
- A Usb-Mini Extension Cable (Delock USB 2.0 Micro-B)
- A SD-Card Extension
- Tonuino Set (Arduino Nano, RFID Reader, MP3-Player)
- Heated insets from cnckitchen M3x3
- M3 screws of different sizez
I printed all parts in PLA, except the bumpers which were printed in TPU.
No supports needed, except for top a bit (where the inlet is).
The handels should be printed with 100% infill.
The other parts I printed with 55% infill, but I think its too much (heavy).
25% should be enough.
