Modular DIY B0XX/Frame1

DIY B0XX/Frame1 that can be printed in pieces on small print beds (the largest part is 100x100x25mm). Modules are bolted together and lids bolted down using threaded inserts.

This is not a guide on how to make a DIY B0XX. Join Crane's Discord if you want to know more about these controllers and also take a look at HayBox which is what I'm running on my controller.

The Raspberry Pi Pico gets attached with 2 raspberry_pi_pico_stand.stl's and HTangle's Model BirdD (usb-c breakout with Schottky diode included) is attached with threaded inserts. Key  switches are pressed in to the 14x14mm cutouts which may need to be sanded for the switches to go in. Keycaps are for Gateron ks-27 low profile switches and the stems may need to be filed in order to fit (see images).

This is inspired by HEKTIK's Bolt-together LP DIYB0XX.

Parts List:

17 M3x20mm (13 for lids, 2 for pico mount, 2 for usbc cable mount) 
28 M3x16mm (for side walls)
2 M3x6mm (for HTangle's Model BirdD)
28 M3 nuts (for side wall screws)
    - What I used: amazon link

15 Threaded Inserts M3*4.6x5.7mm (for lids, amazon link)

4 Eyeglass Screws HD2.5 x SD1.4 x L6mm (for Pico + stand)
4 Eyeglass Bolts (for Pico + stand)
    - What I used: amazon link

1 Raspberry Pi Pico

1 HTangle's Model BirdD: https://github.com/HTangl/Model-UD

1 USBC to USBC Mount: amazon link 

• The enclosure is made with this exact cable in mind. It won't work for other cables without modifications.

20 Switches (I'm trying out these: https://www.amazon.com/dp/B09WYJ8HSD?ref=ppx_yo2ov_dt_b_product_details&th=1 though I think most will work)

Wire (I used 26awg solidcore)