Mosquito Net Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Both handles for my mosquito net were broken, so I decided to create one. Works perfectly fine. Looks much stronger…
- Ocena
- 4,5 / 5
- Polubienia
- 30
- Pobrania
- 242
- Wydruki
- 3
- Wyświetlenia
- 805
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Both handles for my mosquito net were broken, so I decided to create one.
Works perfectly fine.
Looks much stronger than original.
Printed with PLA so it is more flexible than original one, and seems to be stronger.
I would recomment wite PLA to prevent overheating by sun.
It is very important to print it on the side (same as on the first picture).
I used raft, because contact with bed is small and my bed is not in a good condition.
I've checked it on two types of mosquito nets. Anyway it is quick print and requires low material.
Please note: Check if it is holding your net BEFORE installing the net in place to prevent falling.
Author is not responsible for any damage caused by falling net. You are using it on your own risk,
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
100%
Category: Parts