Sloped Hexasphericon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Sphericon is a shape with 2 edges and one continuous face similar to that of a Mobius Strip.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 546
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Math
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A Sphericon is a shape with 2 edges and one continuous face similar to that of a Mobius Strip.
A Hexasphericon is a variation of this shape made by revolving a hexagon around its central point, slicing, and rotating.
Print instructions
There are 3 parts in this file that can be printed at once:
- Outer Shell (2x)
- Inner connector
These files should be printed at a semifine layer height although they will work at almost any height you want. Be sure to change the start and end points of your layers so as not to create a seam.
Supports are recommended inside the outer shell pieces to hold up the cavity.
Recommended infill: 10-20%