Mitutoyo 503-104 caliper case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Want to treat this tool as one for my lifetime so wanted a good case that I can seal with desiccant to preserve it.
- Ocena
- 4,8 / 5
- Polubienia
- 78
- Pobrania
- 380
- Wydruki
- 11
- Wyświetlenia
- 2131
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
To assemble you'll need 8 (yes 8) m3x40 and the same number of m3 nuts or nylocs.
The insert is separate so you could print in a different filament (e.g. TPU) if you want. The plan is to put some foam or another rubber insert in the top part.
The gasket is just a length of TPU filament.
The hinge lid also folds all the way underneath so open or closed it occupies the same amount of desk space.
This design was inspired by my own…
Waterproof(ish) Box o' Things by Richard M | Download free STL model | Printables.com
and also the excellent…
Rugged Box (Parameterizable) by Whity | Download free STL model | Printables.com