Vase mode vented funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a funnel with vent to be printed in Vase mode
- Ocena
- 1 / 5
- Polubienia
- 22
- Pobrania
- 164
- Wydruki
- 0
- Wyświetlenia
- 532
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Ever faced a situation where you pour some liquid into a container using a funnel and have issues with venting? For me it always happens when changing oil in my car. When I'm pouring used oil from the collection basin into the empty oil can it's always a bit awkward. But not with this funnel!
The outside diameter on the top is 130mm, total height is 80+60mm, so you can rescale if needed.
Printing directions:
-top side towards the bed,
-1 or 2 bottom layers (only used for bed adhesion, needs to be cut out afterwards anyways,
-0.8 or higher line width (for rigidity). I used 0.8mm on 0.6mm nozzle and it's ok, but 1mm would be better,
-vase mode!
-material: no special preferences, but PETG seems perfect for the application. I used PCTG,