Protective case for REVOPOINT POP/POP2 with heatsink hole and two cold shoes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective case for REVOPOINT POP/POP2 3D scanners with support for high efficience M.2 heatsink and two cold shoes…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Protective case for REVOPOINT POP/POP2 3D scanners with support for high efficience M.2 heatsink and two cold shoes for led lights.
I have designed two versions... one in what scanner is introduced and another one made with two parts joined with screws. Both uses the same heatsink pasive model MC1 from Be Quiet.
Added versión 2.1 with reduced walls where fix heatsink and changed 3mm holes to 2mm holes in order to be according with screws uses in the MC1 heatsink.
Added a variation with hole for articulated shoe included in the kit.
I have planned 2mm separation between plastic and heatsink to avoid contact and heat transmission. You can use metal rings as separators or 2mm PTFE separators obtained from a 3D printer bowden tube. In additión I have used 4 M2x8mm screws to fix heatsink to the case.
Category: Tools