1 / 3
Fast and Stronger Print In-Spool Desiccant (Silica Gel) Container with Hygrometer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fast printing desiccant holder with space for hygrometer
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 740
- Wydruki
- 7
- Wyświetlenia
- 3073
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 7) (Komentarze: 14)Remiksy (1)Kolekcje (175)Powiązane
Pretty much the same as:
https://www.printables.com/model/67857-fast-print-in-spool-desiccant-silica-gel-container
But increased the overlap to make the wall stronger without impacting print time. You can see this in the 4th picture that shows the straight-line overlaps.
The thread can be a bit tricky: for best results, stick to .2mm and z-seam random.
Updated 23/1/23
Reduced the slot width on the top and bottom from 1.2mm to 0.95.
Added better grip to the bottom of the base.