Ender 5 S1 switch cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Is your pet a bit too curious and likes to press buttons that light up? With this cover they won't stop a print at least
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 178
- Wydruki
- 1
- Wyświetlenia
- 1147
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A thin cover that you can thread over the AC-plug of the Ender 5 S1 to keep from bumping the switch on accident or to prevent curious cats and dogs away from interrupting your prints. If it's a bit too loose it can be taped to the printer with some VHB-tape (not tested however)
Print without supports if you've got your bridging setting dialed in for best results, also possible to print with tree supports if you're not fully tuned in. Looks best with a milky or transparent filament as it will illuminate the cover when the printer is on.