Sloppy 80MM fan housing for Octopus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and dirty way to use that spare 80MM fan on your Octopus Board!! Note: Scale to Metric or Scale up 2540%
- Ocena
- 4 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 274
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I made this very quickly, to help tune my printer. I messed up and put some sharp corners in there that didn't print excellent for me but served the purpose.
It has a clip-on feature similar to a pi fan housing i'm using. i used that idea and made little feet that grip the sides of the board. one foot on one side, between the steppers, and two feet on the other side, more or less either side of the wiring.
This is PETG in .2 layer height.
Scale up 2540% or to metric, uses 3mmx8 screws, if your fan has short tabs.