AnkerMake M5 detached Spoolholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this model you can reuse your M5 Spoolholder if you don't have enough space to attach it directly to your printer.
- Ocena
- 4,833 / 5
- Polubienia
- 79
- Pobrania
- 302
- Wydruki
- 7
- Wyświetlenia
- 2100
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I didn't had enough space to attach the original AnkerMake M5 Spoolholder to my new printer so I made a little stand for it.
Print instructions:
Just print it with PLA and standard settings. You can slow down the first layer to 50mm/s in order to get a great first layer quality. To increase the strength I recommend to print the model with a Wall Line Count of 4.
The print time is roughly an hour.
Assembling is pretty straight forward. Just screw in the spoolholder into the four screw holes.
Happy printing :)