Fellow ode brush & water sprayer holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket for the fellow ode coffee grinder to hold the cleaning brush and a water spray bottle.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 235
- Wydruki
- 9
- Wyświetlenia
- 1491
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
The fellow ode is a great coffee grinder, but it is a bit messy!
Misting your coffee beans with a spray of water helps cut down on the mess almost completely. I made this bracket to hold the ground brush and spray bottle I use. I printed this from PLA with 2 walls and 15% infill. I made it in two pieces with “dovetail joint” so that each part could be printed in its optimal orientation.
This will hold any spray bottle up to 32.8mm in diameter, and a brush up to 16.8mm in diameter. I use a glass bottle from whole foods and the brush that came with the grinder.