Conan the Barbarian Bust (STL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) CONAN THE…
- Ocena
- 4,938 / 5
- Polubienia
- 254
- Pobrania
- 1201
- Wydruki
- 20
- Wyświetlenia
- 4348
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :)
CONAN THE BARBARIAN!
This isn't your Arnold Schwarzenegger Conan the Barbarian, it's more like your Frank Frazetta Conan the Barbarian, but ultimately it's your David Östman Conan the Barbarian.
I've wanted to do this guy for a good while now, and after the freakin' nightmare that was Spider-Man, I needed to go back to basics and do something I thoroughly enjoyed, so through the hot nozzle of my CR-10S squirted this hunky piece of savage pectoral delight into existence.
So go ahead, squirt out your own plastic Conan, if you dare.
Print instructions
Sooooo... deep breath
I recommend printing the conan_body.stl at the orientation provided to minimise the supports needed on the actual model itself, having most of them on the print bed. It might look awkward, but it worked really well for me.
I printed this guy on my CR-10S. 0.12mm layer height, 0.4mm nozzle, 2 perimeters (0.8mm), 3DNet.no PLA @ 200°C, 60mm/s, and it took me perhaps 16 hours? 18 hours? Who knows.