Pipe support clamp for 3/4in type L copper and 3/8in threaded rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pipe support clamp for 3/4in nominal type L pipe with pocket to hold 3/8in-16tpi nut to allow attachment to threaded rod
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 1460
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pipe support clamp for 3/4in nominal type L copper pipe with a pocket to hold 3/8in-16tpi nut to allow attachment to threaded rod and wall support. Prints best with the “pipe axis” orthogonal to the build plate, with supports enforced for the cam retaining tabs (see the 3mf file).
This has been remixed from the original to add the pocket for the nut. Small areas have also been shaved away from the clamp opening and one of the hinges to allow for easier installation onto pipe.
Important: These clamps should be removed from copper pipe prior to heating it for soldering to prevent deformation and/or fire.