Man of Steel Bust (STL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) The Man of Steel.
- Ocena
- 5 / 5
- Polubienia
- 1105
- Pobrania
- 5039
- Wydruki
- 55
- Wyświetlenia
- 13 206
- Oceny
- 32
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :)
The Man of Steel.
Or in this case: plastic.
This guy is a huge part of my childhood. I hope I did him justice here, and that you, dear visitor, have a good time printing him (should you choose to do so) and give him a good home on one of your shelves!
Print instructions
Printed on a CR-10S at 0.12mm layer height, 190°C, 60 mm/s, 5% (or maybe 7%...) infill, using a 0.4mm nozzle.
The lower "wedge" part needed some custom supports.