1 / 3
Magnetic Neptune Apex Fusion A3 Probe Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the temperature and PH probes that come with the Neptune Apex Fusion A3.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 676
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Settings:
- 0.2 layer height
- 3 or 4 walls
- Infill > 10%
- PETG is best for aquarium use
- Make sure you rotate the retainer clip on it's side
Materials:
- (8) 10x10x10 N35 (Neodidlium) magnets (they're more like 9.5mm apparently)
- OR: (4) 20x10x10 N35
Notes:
- Make sure the inside magnets are coated to keep them from rusting! (e.g.: epoxy dip)
- The wall that interfaces with your sump is intentionally super thin, it may even be a bit wavy depending on your print, but as long as it keeps the magnet in you should be golden.
- Make super sure you align the magnet poles correctly when populating the magnets for each part.
- Fusion 360: https://a360.co/3iQ1UWi - there are parameters that should make it easy to change dimensions if you need something a bit longer/wider/etc.
