Business Card Case Holder & Stand [& Credit Card too!] (print-in-place, no support)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A print-in-place, no-support Card Holder and Stand. Simply put it on your event table, share your biz card!
- Ocena
- 4,929 / 5
- Polubienia
- 227
- Pobrania
- 1443
- Wydruki
- 15
- Wyświetlenia
- 4424
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like my design, I really appreciate if you can consider a coffee ☕ for me! (LINK)
Version 2 released!
Snaps on sides, slightly easier to open.
Overview
A business card stand for an exhibition booth or an event table. It folds and snaps as a card holder. It is light, you can carry it as your pocket business card case carry for your everyday use as well. I also designed a size to suit for standard credit card size to use this as your simple wallet.
You can print it as print-in-place with no-support.
I personally recommend using PETG for the heat resistance and durability, however PLA/PLA+/Tough PLA should work as well.
It holds both US business card size as well as Japanese business card size. Slightly narrower size uploaded.
Design & Size
Print-in-place
No support
Light weight
Version 2
New version snaps on sides not top. Easier to open than previous Version 1.
Business Card: 93mm x 57mm x 10mm (inner) / 103.40mm x 61mm x 14mm (outer)
Credit Card Wallet: 86.60mm x 55.60mm x 10mm (inner) / 97mm x 59.60mm x 14mm (outer)
Version 1
108mm x 68mm x 12mm (outer) / 100mm x 61.2mm (inner)
104mm x 68mm x 12mm (outer) / 96mm x 61.2mm (inner)
PETG recommended
My print settings: 0.2mm layer height / 2 perimeters / 10% infill rectlinier
Multi-color filament gives a nice gradation finish
Twist horizontally on the bed depending on your cooling air flow direction of your printer