Economical Drawer 112x112mm box no supports needed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a drawer I designed for small parts like screws and electrical components for arduino It has various…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 433
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a drawer I designed for small parts like screws and electrical components for arduino
It has various configurations of boxes for your needs ( with 9,6,3,2 and 1 compartments)
Needs no supports
112x112x29mm inner box size
takes about 145g+200g for the shelf and boxes to print
make sure you clean the bed before printing so you have good bed adhesion
btw the handles came out looking like little cobras ;)
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.15mm
Infill:
15%
Filament: any PETG
Notes:
Separate the Assembly into parts, print the shelf with the backside facing down
Post-Printing =============

Category: Organization