Triblader Boomerang with Reinforcing Spine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to play with different print processes for different parts of my models, so I created this pretty ordinary…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 159
- Wydruki
- 1
- Wyświetlenia
- 1008
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I wanted to play with different print processes for different parts of my models, so I created this pretty ordinary triblader design with a strengthening spine. The idea was to keep the boomerang pretty low density with little infill and a thin skin, and have a spine-like structure reinforce it.
To be honest, I haven't found any advantage of this design over a regular printed boomerang, but I think it looks cool and cyborg-like when printed, so there you are.
Print instructions
Designed in Onshape: Document Link. How to print the two-part model with different processes will depend on your slicer. Try to align the two parts so they share the same center point.