1 / 5
Pen Holder / Tea Light Holder - Right On and Criss Cross — zdjęcie 1
1 / 5

Pen Holder / Tea Light Holder - Right On and Criss Cross

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A set of pen holders / tea light holders. Size it up/down as you wish - make it small, medium, or go large!

Ocena
0 / 5
Polubienia
47
Pobrania
162
Wydruki
0
Wyświetlenia
752
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

https://www.buymeacoffee.com/maxt

----------------------

This is a side product of these 2 models:
- Planter 07 - Right On, with drainage hole and saucer
- Planter 08 - Criss Cross, with drainage hole and saucer
 

3 different models:
- Pen Holder - Right On - with a pattern to the right side
- Pen Holder - Criss Cross - with a diagonal pattern
- Pen Holder - Right On, NO TOP - same as “Right on” model but without the top ring. EXPERIMENTAL model. This model might fail, it all depends on your settings. If you go half-speed or slower, I'm sure you'll be all right. You'll get a flexible pen holder / tea light holder in exchange. 

Size it up/down as you wish - make it small, medium, or go large!

 

SETTINGS / PRINTING (recommendation)

Filament: PETG or PLA. Please note that PLA can deform/break down in the sunlight.
Print: 0.2mm
Nozzle: 0.4mm
Support: Not required
Brim: Not required
Infill: 5-25% (depending on the size of the planter)
Perimeters: 2-3
Vase mode: No


OTHER

- To make the planter smooth and shiny, you could use sandpaper, prime it, (spray)paint it a couple of times and use a varnish coat on top.


LED TEA CANDLE

Do NOT use a real candle. Just don't :)
Use a LED candle - you can buy these for very cheap at the nearest IKEA, dollar store, or mall.

I've used a LED tea candle from Uyuni Lightning as it mimics the flame of the candle in a very nice and pleasant way by glowing up and down randomly. I can also turn it on and off with a remote, or it can be set to light for 6h period at a specific time of the day. It's really great!
Dimensions: H: 5 x Ø 4 cm.
Light source: 1 x CR2450 battery

 

Happy Printing!

--------------

https://www.buymeacoffee.com/maxt

Tagi