Dual Channel Relay Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for dual channel relays, particular “2 Relay Module”, black board. It is designed to hold the module in…
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 668
- Wydruki
- 1
- Wyświetlenia
- 2219
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a case for dual channel relays, particular “2 Relay Module”, black board. It is designed to hold the module in place by pressing the top and bottom parts together only.
The case consists of 2 parts that are screwed together with four M3 20mm screws and nuts. All holes can be used although to mount the case on a surface or build plate.
There is an additional bottom plate with two mounting supports on each side and holes spaced 55mm between.
Print Settings
Resolution:
0.3
Infill:
20%
Filament: Devildesign PLA
Category: DIY