1 / 10
Paragliding Brakeballs (Balls Handles) with Screw and Nut — zdjęcie 1
1 / 10

Paragliding Brakeballs (Balls Handles) with Screw and Nut

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These paragliding brakeballs uses M3 screws and nuts to hold the two pieces together. Thanks, Benjamin! Materials…

Ocena
0 / 5
Polubienia
10
Pobrania
96
Wydruki
0
Wyświetlenia
826
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This paragliding Brakeballs (Balls Handles) uses M3 screws and nuts to hold the two pieces together. Thanks, Benjamin!

Materials needed:

  • 2x M3, 16mm flat head screw / 20mm screw
  • 2x M3 nut

If the screws stick out just a little bit, a ‘scale to size’ feature in the slicing software can be used to slightly lift up object height on the Z axis.

Print Settings

Rafts:

No

Supports: 

No

Resolution:

0.3

Infill: 

100%

Notes:

Nozzle: 0.4

Material: PETG, PLA

 

 

Category: Sport & Outdoors

Tagi