1 / 4
Deer Skull Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an angled peg for hanging a deer skull on a wall.
- Ocena
- 5 / 5
- Polubienia
- 119
- Pobrania
- 1081
- Wydruki
- 2
- Wyświetlenia
- 6002
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (175)Powiązane
I made this mount to hang a deer skull on the wall. It can be used as-is or modified for hanging any other heavy item that requires a strong hook.
It is split down the middle for two reasons.
- It allows you to print it with the layer-orientation in the most optimal direction for strength with no supports.
- Due to there being two pieces, the centerline of the peg has the solid cross-sectional thickness of 2x your perimeter settings. I glued the two halves together with CA glue.
The OpenSCAD code is included and it is fully parametric.
I printed mine with eSUN PLA+ with a 0.4mm nozzle and 0.10mm layers. I think it was printed with 6 perimeters and 10% rectilinear infill, but I suggest you go with as many perimeters as you think you can get away with without any warping.