3D Printer Enclosure Door Hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Door hinge for 3D printer enclosure. Designed for 6mm or 1/4" material. With this hinge the door is removable.
- Ocena
- 5 / 5
- Polubienia
- 119
- Pobrania
- 879
- Wydruki
- 5
- Wyświetlenia
- 3275
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Door hinge for 3D printer enclosure.
It uses M4 bolts.
Overall height is 50mm.
I designed it for 6mm or 1/4" material.
The hinge is snug but not tight and the door is removable. Make sure there are no plastic zits inside the hole and around the pin to avoid binding. If it's too tight you can use a bit of lithium grease or sand the pin slightly.
Happy printing!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25% cubic
Filament: PETG Purple
Notes:
You might want to increase the wall thickness and/or your infill for more strength depending on the size and weight of your door.
Category: 3D Printer Accessories