Chilly Bin Water-Resistant Storage Box MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE: 08/12/2020 Designed some handles for the popular little box.
- Ocena
- 0 / 5
- Polubienia
- 165
- Pobrania
- 548
- Wydruki
- 0
- Wyświetlenia
- 4132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.
UPDATE: 08/12/2020 Designed some handles for the popular little box. Added Lid with holes and a number of distinctive style handles, 2 M3x10mm screws are all that's needed.
You will need 8 M3x20mm bolts or optionally 8 M3x25mm and 8 M3 Nyloc lock nuts as seen in the photos.
I used a tap to thread the holes but you can use an M3 bolt to self-tap the holes but I'd suggest you use a little lube to prevent the plastic from cracking. I would recommend you place a dab of lube on the latch bolts for easier latching.
Print the seal in TPU, or you can use silicon. I recommend you print the seal with 2 bottom layers, no infill and a single perimeter, it helps the lid in sealing better and it's not so hard to latch.
If you use silicon do not fill the groove right to the top otherwise you might find the lid won't close as it should making latching difficult.
The inner dimension of the box is big enough to fit an iphone11 size phone, big fat wallet and keys etc.
The inner dimensions of the box
W-80mm
H-80mm
L-160mm
The inner dimensions of the lid
W-80mm
H-15mm
L-160mm
Included in the files is an MMU version if you have the capabilities, otherwise there is a single colour version and a version without the logo if you prefer.
Happy Printing