1 / 6
Large spool holder (300mm or 350mm diameter - 2.5, 3.5, 5kg). Smooth rolling. — zdjęcie 1
1 / 6

Large spool holder (300mm or 350mm diameter - 2.5, 3.5, 5kg). Smooth rolling.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Large spool holder (300mm or 350mm diameter). PTFE contact. Smooth rolling.

Ocena
5 / 5
Polubienia
14
Pobrania
129
Wydruki
1
Wyświetlenia
771
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Large spool holder. PTFE contact. No spool swinging.

Maximum spool size is 105mm width at the axis.

There are two configurations. One is for 300mm max diameter spool, then usual 2.2kg spool fits ( SpoolHolder-rxxx - d300-I3D-1). The other is 350mm max diameter spool (SpoolHolder-rxxx - d350-I3D-1).
They support also smaller spools. Internal diameter has to be more than 50mm.

Hardware:

  • PTFE tube OD 4mm L128 x2

Optional hardware:

  • M3 (ISO4762-DIN912) screw x1. Length is between 10 and 20. The longer, the better.

PTFE tubes make the spool turning smoothly. There is 2 PTFE tubes to avoid the spool to swing when pulled from a direct extrusion printer without reverse bowden. If you choose (like me) a PTFE with ID 3mm, then you can insert in the tube some printed rod (AxeRigideIntTubePTFE-r00a - d2.8-lxxx) to make the tube mode rigid.

To make the dovetail assembly more rigid, you can add a M3 screw or glue if you don't have a screw.

Printing recommendations:

  • 3 perimeters / 1.5mm minimum shell thickness

  • Material: Need some heat resistance. ASA or ABS are good candidates but require enclosure. PET tend to deform over the years with weight and heat (summers). I had some of PET for 5 years, they were still functional but deformed.

Log:

Tagi