Cat Bookmark
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bookmark for cat lovers!
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 250
- Wydruki
- 4
- Wyświetlenia
- 2130
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
Bookmark for cat lovers!
Use 0.1mm or 0.05mm layers if you want to make this out of multiple colors (or scale the stl file up 2x to use 0.2mm thick layers).
There is purposefully a clear area where someone's initials could be added (such as could be done with free Tinkercad)
Print instructions
Category: Other Summary
Bookmark for cat lovers!
Use 0.1mm or 0.05mm layers if you want to make this out of multiple colors (or scale the stl file up 2x to use 0.2mm thick layers).
There is purposefully a clear area where someone's initials could be added (such as could be done with free Tinkercad)
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: Doesn't Matter
Supports: Doesn't Matter
Resolution: .1 or .05