Analogue Pocket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a reasonably accurate model of an Analogue Pocket created from measurements taken from an actual unit. I used this to sculpt a custom grip.
Included is a single combined STL, separate STLs for the front and back halves, as well as a bare top half with separate face buttons and screen lens.
I printed the complete front and back halves flat side down with 0.1mm layer height and supports under the cartridge slot overhangs with great results. There are holes in the back of the front half that fit heat set threaded inserts for M2 screws, but it's easy enough to simply glue the two halves together.
The cover image was rendered in Fusion 360 using the actual model.
Model created by Matthew Goldthwaite