Ubiquiti G4 Dome Soffit Install Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was installing some g4 domes on the soffit of my house and REALLY had a hard time getting the camera to twist onto…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 779
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was installing some g4 domes on the soffit of my house and REALLY had a hard time getting the camera to twist onto the bracket without bending the soffit and pushing the mount higher. I made this bracket that screws into the soffit and makes it MUCH easier to attach the camera plate. I use two scres for the plate and two (drywall) screws for the bracket.
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rafts:
No
Supports:
No
Resolution:
0.3 mm
Infill:
12- 25%
Filament:
NA ASA
Notes:
Print this in ASA so its UV resistant and stays looking nice longer
Category: Household