PDU "Power" Console Parametric with Catenary Function
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed and printed a pair of these consoles to support a PDU for my daughter's desktop instruments.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 370
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
I designed and printed a pair of these consoles to support a PDU for my daughter's desktop instruments. Used the catenary function to form the curve. This makes it strong enough to bear more weight. Some circular/elliptic holes were added in the lower part, it makes it even stronger. You may play with the parameters to fit the object to your needs. You will need OpenSCAD for this.
Print instructions
Printer brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: No
Resolution: 0.15mm
Infill: 20%
Filament_brand: any
Filament_material: PLA
Notes:
Prints well without support if placed flat (on the side), this direction is recommended for strength as well.