1 / 1
Rack and Pinion Focuser - Longer drawtube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inner drawtube with more notches and support end
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 93
- Wydruki
- 2
- Wyświetlenia
- 603
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (17)Powiązane
I noticed that the drawtube could bind in the original version because it was not supported by a tube without notches. So I added a support extension and also a few notches to allow for more movement. Works great now.
Note this is the “tight fit” version.