DSLR Business Card Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A business card holder in the shape of a DSLR camera, perfect for advertising your photography services!
- Ocena
- 5 / 5
- Polubienia
- 147
- Pobrania
- 510
- Wydruki
- 6
- Wyświetlenia
- 2008
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
This is a business card holder in the shape of a DSLR camera. This will hold about 15 business cards that are 2" x 3.5" x 0.014" (50.8mm x 88.9mm x 0.35mm) between the grip and the lens. It is also possible to fit a couple of cards vertically between the flash housing and the lens, though fewer cards will fit there as compared to the shelf built in to the grip.
I printed this with PLA, and no supports, with the lens pointed up vertically on the Z axis. In this orientation, there are some small overhangs around the buttons and the hot shoe, but these do not seem to cause much of an issue.
The photo of the triplane used for the background in the example business cards is CC-SA licensed, and was shared here: File:Fokker DR 1 ILA 2004.jpg - Wikimedia Commons
