Enclosure toolholder for custom tools with step and inventor file
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made to fit custom tools mounted at the top left side with nuts. Includes step and inventor file.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 694
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A remix of the original tool holder for the Prusa enclosure that contains the tools I wanted. Made to fit on the top left side of the enclosure using square M3 nuts. The step and inventor file is shared here, so it's hopefully easier for people to remix to hold tools they want to.
If no LED upgrade is installed in the enclosure you can use 2x M3x8 bolts. If the LED upgrade is installed you have use a M3x20 or M3x25 and put the bolt from the inside of the enclosure through the LED upgrade. (Remove the M3 nut in the LED upgrade fastener first)