1 / 3
New Bright Train Wheels
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable replacement wheels for New Bright G-scale trains, like the Holiday Express.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 176
- Wydruki
- 0
- Wyświetlenia
- 1470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D printable replacement wheels for New Bright G-scale trains, like the Holiday Express.
Four files included:
- New Bright Train Wheel Drive: The rear wheel of the train. Has a grove for a “traction tire." I found a 32mm x 3mm o-ring fits well on both the original wheel.
- New Bright Train Wheel Run: The front and middle wheel of the train.
- New Bright Train Wheel Axel Extension: Helps fill the space on the axle between the wheel and train body. I recommend gluing it to the back of the wheel to add stability.
- New Bright Train Wheel Peg: The peg for connecting the wheels to drive rod.
Printing Notes:
- Supports are optional and dependent on your printer. I printed with supports for both to the bed and the grove for the drive wheel.
- The peg may need to be printed on its side. The part is very small and, while warm, will flex under the print head.
Installation Notes:
- The hole for the axle is intentionally small. I heated the axle using a lighter an pressed the wheel on for a snug fit.
- Remember to mount the o-ring before connecting the drive rod to the wheel.
- The peg may need a little clean up to fit the hole of the wheels. It should fit both OEM and printed wheels.