Jaycar LED Strip V-Slot (2020/2040/etc.) Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Jaycar LED Light strip is just a bit too long to use a screw based mount on my Bear Frame. Instead, I took…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Jaycar LED Light strip is just a bit too long to use a screw based mount on my Bear Frame.
Instead, I took inspiration from ManFur's bracket and jterranella's mounts to create this.
At the end of the light strip, I could've made some holes and screwed it together but a cable tie worked just as well.
Print with as high infill as possible to prevent it from snapping.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
60+
Filament: eSUN PETG Orange
Notes:
Printed with PETG but PLA would work as well.
Category: 3D Printer Accessories