[Version 2] Mounting bracket for DJI Mic /w Insta360 X3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for mounting DJI Mic receiver with Insta360 X3.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 539
- Wydruki
- 6
- Wyświetlenia
- 3816
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Bracket for mounting DJI Mic receiver with Insta360 X3.
Update: There is a Version 3 available now. V3 utilizing Ulanzi Hummingbird Quick-Release system, so the whole mounting adapter piece can be detached from the camera setup quickly.
The downside is that Ulanzi Hummingbird Quick-Release is required. If you are OK with leaving the adapter on the stick, V2 is still good.
----------------------------------------------------------------------------------------------------------------
Version 2 is slimmer. It's 17.50mm thick, same as the receiver itself. Added curve to support left and right side of the camera, so it's a little more stable.
The receiver is now click in with added bump on the cold shoe connector.
v1
https://www.printables.com/model/363542-mounting-bracket-for-dji-mic-with-insta360-x3
related models
https://www.printables.com/model/359907-dji-mic-rx-reference-3d-model
https://www.printables.com/model/361256-insta360-x3-reference-3d-model