KYLO REN'S COMMAND SHUTTLE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first attempt at a remix.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 702
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This is my first attempt at a remix. I haven't had a chance to print it yet, so I'm not sure how it will turn out. It will need support to bed. The wings should move. Good Luck
UPDATE 3-13-2016: Version 2 = A total redo of the wing hinges and a much larger tolerance.
UPDATE 3-9-2016: I've printed It on a Monoprice IIIP/Wanhao Duplicator I3
PLA+ from ESUN,
.15 layer height
40mm/sec
10 infill
Looks great!! has very tight tolerances on the wings - Be careful when unfolding them. I may change that at a later date.
Print Settings
Printer:
Monoprice II3/Wanhao Duplicator I3
Rafts:
Doesn't Matter
Supports:
Yes to build plate
Infill:
20
Notes:
If you choose to print this before I do, Please let me know how it turns out. And a special thanks to HanShot1st for doing the wonderful ground work.
Category: Vehicles