1 / 6
AA Battery Storage Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix based on the great Parametric Rugged Box from @TheSameNameTwice so that it can store 16x AA batteries
- Ocena
- 4,923 / 5
- Polubienia
- 119
- Pobrania
- 1304
- Wydruki
- 13
- Wyświetlenia
- 3983
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 13) (Komentarze: 14)Remiksy (0)Kolekcje (164)Powiązane
Based on the AAA battery Storage Box, I decided to create a remix in order to store 16x (4x4) AA batteries instead.
Additionally and based on the feedback provided by the comments on that original model, I also included some slight improvements, such as:
- Increased diameter for the batteries place holders (14.8mm instead of 14.7mm) to avoid being so tight or even getting trapped. Many people suggested to print at 101% or so, but I think it's better to increase the size in the model.
- Added material on the hinge joint to avoid breaking it when assembling.
- Reducing some material at the locking ball hinge so that it can be assembled with less force (although this creates some play at the hinge).
Obviously PETG is recommended, but I validated this idea just with PLA (see pictures).
I hope you can find this useful and nice! Thanks to @TheSameNameTwice for his Parametric Rugged Box design and ideas.