Dungeon and Dragons Spellbook card box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nice box to store your D&D spellbook cards. Serveral sizes available, also on request via PM.
- Ocena
- 4,833 / 5
- Polubienia
- 92
- Pobrania
- 307
- Wydruki
- 6
- Wyświetlenia
- 1682
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Storage box for D&D spellbook cards. There are several sizes for different classes. I don't own every spellbook, so if yours is not here, please message me how thick your spellbook is and I upload STL's for that size.
This model is an easy long print, although be aware of warping! A default 0.2mm will do fine with a 0.4mm Nozzle and Perimeters set to 3. Recommend PETG, not PLA.
Used filament in the picture; Extrudr PETG copper (The color, not real copper!)
At first, it will close very difficult, but after 10x times it will become a bit looser and for normal use. To open it, you have to break it, not strait up. See photo.
Expected spellcard size width x height = 62.5mm x 89mm
Spellbook thickness
Cleric 65mm
Druid 55mm
Paladin 32mm
Arcana 2x spellbook 55mm ( Double slot box)
If your box size isn't here, please send a message.