Parametric eyeglasses holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an even better version of my eyeglasses holder V2. Its easy to customize with Fusion 360!
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 92
- Wydruki
- 2
- Wyświetlenia
- 473
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
So someone asked me if I could make a version with more trays so I got a bit to excited and made the whole model for scratch to make it totally customizable (and of course support free) with Fusion 360! (which is free to use for anybody).
Customizing
So when you open the ‘’change parameters'' button you can see there are several parameters in favorite which you can customize. these are the following:
Printing
I included the 3MF files for printing with prusa slicer, but of course you can use your own favorite one! (make sure to rotate the base as shown in the pictures below). once you are done with customizing make sure to replace the file in the slicer to get your custom dimensions!
For printing the tray I included a modifier that you can use to even further customize your look. It sets the top and bottom layers to 0 to show the infill, feel free to change the infill percentage or type!
- Base:
- tray:
assembly
Once all printed just put the tray on the base with a bit of glue take a picture and upload your make, and voila you are done ;)