1 / 3
Spacer ring for riflescope throw lever (universal)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer ring for riflescope throw lever - Vector Optics/Victoptics, anyway it is universal!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Spacer ring for riflescope throw lever. This one was specially designed to use with Vector Optics Matiz 3-9x/50mm scope which has 42 mm inner diameter. I needed to instal original Vector Optics throw lever (Riflescope Throw Lever-Vector Optics - Practical Solutions in Rifle Scope & Red Dot Sight) which has a little bit bigger inner diameter, so it does not fit (44 mm inner diameter). The spacer fixes the issue and looks really nice!
Printing:
- PLA or PETG (recommend)
- 30 % infill
- no support
- 0,10 mm layer height
Notes:
- You can adjust the size by X/Y/Z scaling in your slicer - this spacer is universal and can be used with any riflescope.
- There are 3 versions - choose which one you like more :)