Prusament Rolodex business card holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modify your prusament roll to become a rolodex for business cards. Holds up to 30 businesscard containers.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 784
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Upgrade an old and empty spool of prusament into a rolodex for business cards to hold up to 30 different types, so A to Z and 4 different ones. Especially with the upcoming PrusaSIicer Feature, it will become really easy to insert the alphabetic characters into it.
What you require:
- 1 empty prusament roll
- 2 Rings to be printed
- Any number of businesscard holder to be printed
installation is quite simple
- remove the plastic parts from the carton spool axle.
- insert the two rings onto the (inner side) of the plastic part of the spool.
- re-install the cartboard part.
- install any number of business card holder, just click them in (you might just need to pry the edges open)
You can use this horizontal or pick any spoolholder design from printables and use it vertical. A horizontal lazy susan is in the make to spin it in horizontal position.
Print as directly imported from STL into the slicer, no rotation needed. Add brims in case you are not certain of proper adhesion. print with 4 layers (just to make sure the hinges are strong enough.
Enjoy organized business.